Dr. Iskandar, ST.M.Eng.Sc., IPM

Tentang Saya (About Me)

I completed my Bachelor’s degree from the Department of Mechanical Engineering at Syiah Kuala University, Banda Aceh, in the field of Production and Machinery Engineering in 1997. I obtained my Master’s degree from the Department of Design and Manufacture at University of Malaya, Kuala Lumpur Malaysia, focusing on Ergonomics in 2007. I continued for my Doctoral degree in the same department and university with a concentration on Product Design and completed it in 2013. There are several solar car race events that I have participated in, among them are the World Solar Challenge Australia in the years 2007 and 2009, the Shell Eco Marathon for the type of Prototype Gasoline in 2010, Sepang, Malaysia, the National Energy Efficient Car Contest (KMHE) National level with the type of electric prototype in 2015, Brawijaya, Malang, and also KMHE in 2016 with the type of prototype and urban electric in Yogjakarta.



 



email iskandarhasanuddin[at]unsyiah.ac.id
www https://www.scopus.com/authid/detail.uri?authorId=35317177500
idGaruda idThomson idScopus idGoogleScholar

Publikasi (Publications)

Jurnal (Journals)

Arya R. Nasution, Z. Fuadi, I. Hasanuddin, R. Kurniawan, 2020, Effect of vegetable oils as cutting fluid on wear of carbide cutting tool insert in a milling process, The 9th AIC 2019 on Sciences & Engineering (9thAIC-SE) 18-20 September 2019, Banda Aceh, Indonesia, IOP Conf. Series: Materials Science and Engineering, 796, 1-10, 1757-899X.

M.H.A.Hassan, Z.Taha, I. Hasanuddin, A.P.P.A. Majeed, H. Mustafa, and N.A. Othman, 2020, A simplified human head finite element model for brain injury assessment of blunt impacts, JOURNAL OF MECHANICAL ENGINEERING AND SCIENCES (JMES), 14 , 6538 – 6547, ISSN: 2289-4659.

Iskandar Hasanuddin, Mohd. Iqbal, Suparno, Raja Ariffin Raja Ghazilla, Friesca Erwan, 2019, The Effect of Working Environment and Motivation towards Labors’ Performance: A Case Study in Aceh at PT Pupuk Iskandar Muda , Aceh International Journal of Science and Technology (AIJST), Vol. 8, 35 - 40, 2503-2348.

Akhyar, Husaini, Hasanuddin Iskandar, Farhan Ahmad, 2019, Structural Simulations of Bicycle Frame Behaviour under Various Load Conditions, Materials Science Forum, Vol. 9, pp. 137-147, https://doi.org/10.4028/www.scientific.net/MSF.961.

T E Putra, Husaini, N Ali, I Hasanuddin, Hendrayana, A Bakhtiar, 2019, Numerical analysis of the stress leading to fatigue failure on a coil spring of the front suspension of a car, IOP Conf. Series: Materials Science and Engineering, 523, 1-5, doi:10.1088/1757-899X/523/1/012066.

A Akram, I Hasanuddin, N Nazaruddin, R Putra, M M Noor, 2019, Mechanical behavior of hybrid glass Fiber-Jute reinforced with polymer composite for the wall of the Acehnese boat ‘Jalo Kayoh’, IOP Conf. Series: Materials Science and Engineering, 523, 1-6, doi:10.1088/1757-899X/523/1/012076.

N Nazaruddin, A Akram, I Hasanuddin, M Iqbal, R Kurniawan, R Putra, 2019, Mechanical properties of glass fiber reinforced polyester resin for use as the wall of the Acehnese boat \'Thep-Thep\', IOP Conf. Series: Materials Science and Engineering, 523, 1-5, doi:10.1088/1757-899X/523/1/012080.

I Hasanuddin, R Fahrizal, D Asmadi, 2019, Analysis of transport workers\' postures in the loading process of manual material handling activities by using the photogrammetric method, IOP Conf. Series: Materials Science and Engineering, 523, 1-10, doi:10.1088/1757-899X/523/1/012081.

Lia Asmawati, Nyak Amir, Yeni Marlina, Iskandar Hasanuddin and Sukardi Putra, 2019, The Analysis of Hand Motion Angle and Distance of 200 Meters Rowing Athletes Administrators the Province of Aceh , IOSR Journal Of Humanities And Social Science (IOSR-JHSS) , 24 (9), 20-25 , doi: 10.9790/0837-2409052025 .

Husaini, M Najib and I Hasanuddin, 2019, Analysis of cracks in the welded zone of stainless steel pipe used in high-pressure decomposer equipment , IOP Conference Series: Materials Science and Engineering, 602, 1-7, doi:10.1088/1757-899X/602/1/012063.

Iskandar Hasanuddin, Muhammad Tadjuddin, Hasan Akhyar, Mardhatillah Mardhatillah, 2019, Desain dan Analisis Rangka Mobil Listrik Malem Diwa X.2 Model Prototype Menggunakan Metode Elemen Hingga, Jurnal Teknik Mesin Unsyiah, volume 7, nomor 1 (juni 2019) , 7, 10-14, 2301-8224.

Iskandar Hasanuddin, Husaini, M. Syahril Anwar, B.Z. Sandy Yudha, Hasan Akhyar, 2018, Stress and strain analysis from dynamic loads of mechanical hand using finite element method, Materials Science and Engineering, 352, 012017, doi:10.1088/1757-899X/352/1/012017.

Akram, Iskandar Hasanuddin, Nazaruddin, M. Syahril Anwar, Zulfan, Norhafizan Ahmad, 2018, A comparison of the structural strength between fiberglass and jute fiber in the Acehnese Traditional Boat Jalo Kayoh using finite element method, Materials Science and Engineering, 352, 012020, doi:10.1088/1757-899X/352/1/012020.

Husaini, Iskandar Hasanuddin, Sandi Yudha B. Z., Hasan Akhyar, 2018, Stress analysis on mechanical hand prototype with kinematics model approach and performance tests, AIP Conference Proceedings, , 030001-1, https://doi.org/10.1063/1.5046236.

Rudi Salam, Mohd. Iqbal, Iskandar Hasanuddin, 2018, Desain dan Analisis Artificial Exoskeleton pada Prajurit TNI, Jurnal Optimasi Sistem Industri (JOSI), 2442-8, 135 - 142, 2442-8795 (Online).

Friesca Erwan, Mohd. Iqbal and Iskandar Hasanuddin, 2018, The analysis of nursing’s work systems in relation to burnout syndrome (A case study: nurses in RSUDZA, BLUD RSIA, and RSUD Meuraxa, Banda Aceh, Indonesia), Materials Science and Engineering, 453, 012051, doi:10.1088/1757-899X/453/1/012051.

Khairil, Samsul Bahri, Aulia Rizki and Iskandar Hasanuddin, 2018, Experimental study on performance of the diesel engine fuelled by cerbera odollam oil biodiesel blends, International Journal of Smart Grid and Clean Energy, vol. 7, 297-302, 2373-3594.

ZAHARI TAHA, MOHD HASNUN ARIF HASSAN and ISKANDAR HASANUDDIN, 2015, Analytical modelling of soccer heading, SADHANA - Academy Proceedings in Engineering Sciences, Vol 40, 383, 0256-2499.

Iskandar Hasanuddin, Zahari Taha, NukmanYusoff, Norhafizan Ahmad, Raja Ariffin Raja Ghazilla, Husni and Tuan Mohammad Yusoff Shah Tuan Ya, 2015, INVESTIGATION OF THE HEAD IMPACT POWER OF A SEPAK TAKRAW BALL ON SEPAK TAKRAW PLAYERS, Movement, Health & Movement Journal, 4(2), 47-58, 2231-9409.

Khairil, Mahidin, Iskandar., 2015, FUNDAMENTAL STUDY OF THE EFFECT OF IRON REDUCTION ON THE BINDER TYPE IN IRON ORE BRIQUETTE, International Journal of Science and Technology, Vol 1 , 159-168, 2454-5880.

Zahari Taha , Mohd Hasnun Arif Hassan, Iskandar Hasanuddin, Mohd Azri Aris , Anwar P.P. Abdul Majeed, 2014, Impact-absorbing materials in reducing brain vibration caused by ball-to-head impact in soccer, Procedia Engineering, 72, 515 ? 520, 1877-7058.

Abdul Syakir Abdul Mubin, Norhafizan Ahmad, Azuddin Mamat, Zahari Taha and Iskandar Hasanuddin, 2014, CFD Study of Drag and Lift of Sepak Takraw Ball at Different Face Orientations, Journal of Advances in Mechanical Engineering, (1) 20, 12, https://doi.org/10.1155/2014/369137.

Ibrahim, Ilham Maulana, Muhajirin dan Iskandar, 2014, Perancangan dan Analisa Turbin Darrieus Tipe H untuk Pembangkit Listrik Tenaga Arus Air, Jurnal Teknik Mesin Unsyiah, Volume, 5, 2301-8224.

M.H. Hasan, W.K. Muzammil, T.M.I. Mahlia, A. Jannifar, I. Hasanuddin, 2012, A review on the pattern of electricity generation and emission in Indonesia from 1987 to 2009, Renewable and Sustainable Energy Reviews, 16(5), 3206-3219, 1364-0321.

T.M.I. Mahlia, H.M. Ng, T. Olofsson, A. Andriyana, I. Hasanuddin, 2012, Energy and cost savings of optimal thickness for selected insulation materials and air gaps for building walls in tropical climate, Energy Education Science and Technology Part A: Energy Science and Research, 29(1), 597-610, 1308-772X.

Norhafizan Ahmad, Zahari Taha, Tuan Mohammad Yusoff Shah Tuan Ya, Iskandar Hasanuddin, 2012, Finite Element Simulation of Takraw Balls and Their Impact on a Flat Surface, Journal of Movement Health & Exercise, volume, 9, 2231-9409.

Raja Ariffin Raja Ghazilla, Zahari Taha, Suraya Kamaruddin and Iskandar Hasanuddin, 2010, Pilot Investigation on the Mismatches of Classroom Furniture and Student Body Dimensions in Malaysian Secondary Schools, Journal of Social Sciences, 6(2), 287-292, 1549-3652.

Zahari Taha, Iskandar and Hilma, 2008, A study of an Impact of Sepaktakraw Balls on the Head, International Journal of Sports Science and Engineering, 2(2), 107-110, 1750-9823.

R.A.R. Ghazilla, Z.Taha, S.H.A. Rashid, Iskandar, Nazaruddin and S.H. Sajeli, 2006, Classroom furniture and student body dimensions in East Malaysia Primary Schools, Indonesian Psychological Journal, 21(2), 161-168, 0215-0158.

Prosiding (Proceedings)

Khairil, Aulia Rizki, Iskandar, Jalaluddin, A.S. Silitonga, H.H.Masjuki, T.M.I.Mahlia, 2018, The potential biodiesel production from Cerbera odollam oil (Bintaro) in Aceh, IJCAET & ISAMPE 2017, The 2nd International Joint Conference on Advanced Engineering and Technology (IJCAET 2017) and International Symposium on Advanced Mechanical and Power Engineering (ISAMPE 2017), Bali, Indonesia , August 24-26, 2017, MATEC Web of Conferences, MATEC Web of Conferences, , https://doi.org/10.1051/matecconf/201815.

Jarnawi Syamsuddin, Iskandar Hasanuddin, Husni Usman, 2017, Analisis Aspek Keselamatan dan Kesehatan Kerja Terhadap Pengendalian H2S di Kilang Sulfur Recovery Unit (Studi Kasus di PTPerta Arun Gas Lhokseumawe), “Memanfaatkan Hasil Penelitian dan Pengabdian untuk Meningkatkan Kesejahteraan Masyarakat dan Kemandirian Bangsa Berbasis Sumberdaya Masyarakat”, Seminar Nasional Teknik Industri [SNTI2017] , Lhokseumawe-Aceh, 13 –14 September 2017 , , Jurusan Teknik Industri, Fakultas Teknik, Universitas Malikussaleh Lhokseumawe-Aceh, , ISSN 2338-7122.

Iskandar Hasanuddin, Syahriza dan Sanneri Yulistia, 2017, Analisa Pengaruh Mesin Potong Rumput pada Badan Manusia Ditinjau dari Aspek Ergonomi Desain, Inovasi teknologi untuk penguatan industri nasional, Seminar Nasional Tahunan Teknik Mesin XVI (SNTTM XVI), ITS, Surabaya, 5 - 6 Okt 2017, Institut Teknologi Sepuluh Nopember (ITS), Institut Teknologi Sepuluh Nopember (ITS), , 978-602-51214-0-1.

Suhaeri, M.R Sukarsa, Iskandar Hasanuddin, Masri Ibr, Masri Ali, 2017, Pengaruh Gaya Potong Terhadap KebulatanHasil Proses Milling Agma A-8 Menggunakan Metoda Helical Interpolasi, Implementasi Teknologi Rekayasa dalam Upaya Peningkatan Kualitas Hidup Masyarakat dan Lingkungan, Seminar Nasional Teknologi Rekayasa (SNTR) IV Tahun 2017 , Politeknik Aceh Selatan, 02 Desember 2017, Politeknik Aceh Selatan, Politeknik Aceh Selatan, , 2407-8735.

Iskandar Hasanuddin, Prima Denny Sentia, Sumarjo Kasmi, 2017, Pengukuran Beban Kerja Fisik Dan Mental Terhadap Porter Bandara Pada Area Ground handling , Implementasi Teknologi Rekayasa dalam Upaya Peningkatan Kualitas Hidup Masyarakat dan Lingkungan, Seminar Nasional Teknologi Rekayasa (SNTR) IV Tahun 2017, Politeknik Aceh Selatan, 02 Desember 2017, Politeknik Aceh Selatan, Politeknik Aceh Selatan, , 2407-8735.

Akram,Iskandar Hasanuddin,Sugiarto, Sabri, Said Amir Azan, Zulfan, 2017, Penerapan Pembuatan Perahu Tradisional Aceh Jalo Kayoh Menggunakan Material Komposit Fiberglass Untuk Masyarakat Pesisir Gampong Rukoh Kecamatan Syiah Kuala, Implementasi Teknologi Rekayasa dalam Upaya Peningkatan Kualitas Hidup Masyarakat dan Lingkungan, Seminar Nasional Teknologi Rekayasa (SNTR) IV Tahun 2017, Politeknik Aceh Selatan, 02 Desember 2017, Politeknik Aceh Selatan, Politeknik Aceh Selatan, , 2407-8735.

Iskandar Hasanuddin, Prima Denny Sentia, Dini Amalia, Husni Usman dan Suhaeri, 2016, Analisis Studi Gerakan pada Aktivitas Perakitan Daun Pintu dengan Metode Maynard Operation Sequence Technique (MOST) (Studi Kasus: PT. MJ, Aceh Besar), Implementasi Teknologi Rekayasa dalam Upaya Meningkatkan Kualitas Hidup Masyarakat dan Lingkungan, Seminar Nasional Teknologi dan Rekayasa (SNTR) III , Politeknik Aceh Selatan, 17 Desember 2016, Politeknik Aceh Selatan, Politeknik Aceh Selatan, , 2407-8739.

Husaini, Iskandar Hasanuddin dan Sandi Yudha B.Z, 2016, Perancangan Tangan Berjari Banyak sebagai Alat Bantu Tangan Manusia, Implementasi Teknologi Rekayasa Dalam Upaya Meningkatkan Kualitas Hidup Masyarat, Seminar Nasional Teknologi dan Rekayasa (SNTR) III, Politeknik Aceh Selatan, 17 Desember 2016, Politeknik Aceh Selatan, Politeknik Aceh Selatan, , 2407-8739.

Iskandar Hasanuddin, Sabri, dan T M Husaini, 2016, Analisa Pengaruh Paparan Getaran Tempat Duduk Pengemudi Pada Bus Lintas Banda Aceh - Medan Terhadap Kenyamanan Kerja , Harmonisasi strategi pemerintah, industri dan perguruan tinggi menghadapi persaingan Masyarakat Ekonomi ASEAN (MEA), Seminar Nasional Tahunan Teknik Mesin XV (SNTTM XV), ITB, Bandung, 5-6 Oktober 2016, ITB Bandung, ITB Bandung, , 978-602-96269-2-6.

Teuku Firsa, Muhammad Tadjuddin, Iskandar, Syahriza, 2016, Path Generated and Optimized of Mobile Robot using Simulation, Harmonisasi strategi pemerintah, industri dan perguruan tinggi menghadapi persaingan Masyarakat Ekonomi ASEAN (MEA), Seminar Nasional Tahunan Teknik Mesin XV (SNTTM XV), ITB, Bandung, 5 - 6 Okt 2016, ITB Bandung, ITB Bandung, , 978-602-96269-2-6.

Khairil, Iskandar dan Mahidin, 2015, KAJI EKSPERIMENTAL PRILAKU DEGRADASI KOKAS DARI BATUBARA MUDA , Challenges and applications of mechanical engineering science for Asean Economic Community in 2015, Prosiding SNTTM XIV, Universitas Lambung Mangkurat (UNLAM), 07-10-2015 s.d. 08-10-2015, Universitas Lambung Mangkurat (UNLAM), Banjarmasin, Universitas Lambung Mangkurat (UNLAM), , 978-602-73732-0-4.

Mohd Iqbal, Muhammad Tadjuddin and Iskandar Hasanuddin, 2014, Mathematical Models to Determine the Metabolic Energy Consumption of Stoop and Squat Lifting, The 2nd International Conference on Natural and Environmental Sciences (ICONES 2014), The 2 nd International Conference on Natural and Environmental Sciences (ICONES 2014), Banda Aceh, 9 september, Banda Aceh, FMIPA Unsyiah, 6, 2407-2389.

Iskandar Hasanuddin, Zahari Taha, Nukman Yusoff, Norhafizan Ahmad, Raja Ariffin Raja Ghazilla, Husni Husni, Tuan Mohammad Yusoff Shah Tuan Ya, 2014, Estimation of Head Impact Power on Sepak Takraw Players Using Finite Element Method, Movement, Health & Exercise Conference (MoHE) Conference, Movement, Health & Exercise Conference (MoHE) Conference, Pahang Malaysia, 2 September , Malaysia, The Innovative Manufacturing, Mechatronics & Sports Lab (iMAMS) Univeristi Malaysia Pahang., 1, -.

Norhafizan Ahmad, Iskandar Hasanuddin, Wong Chee Yik, 2014, Proposed Standard Method for Measuring the Coefficient of Restitution of a Takraw Ball, Movement, Health & Exercise Conference (MoHE)Conference, Movement, Health & Exercise Conference (MoHE) Conference, Pahang Malaysia, 2 September, Malaysia, The Innovative Manufacturing, Mechatronics & Sports Lab (iMAMS) Univeristi Malaysia Pahang., 1, -.

Khairil, Mahidin, Iskandar dan Ibrahim, 2014, Kaji Eksperimental Effek Prilaku Briket Kokas Dengan Menggunakan Material Perekat Berbasis Dapat Diperbaharui, Kontribusi untuk masyarakat, Seminar Nasional Tahunan Teknik Mesin XIII (SNTTM XIII), Universitas Indonesia, Depok, 15 – 16 Oktober 2014, Universitas Indonesia, Universitas Indonesia, 0, 978-602-98412-3-7.

Zahari Taha, Iskandar Hassanuddin, Tuan Muhammad Yussof Shah Tuan Ya, Norhafizan Ahmad, Raja Ariffin Raja Ghazilla, 2010, Estimation of Head Impact Power on Sepak Takraw Players Using Photogrametrics Method, The 11th Asia Pacific Industrial Engineering and Management System (APIEMS). Melaka, Malaysia, The 11th Asia Pacific Industrial Engineering and Management System (APIEMS). Melaka, Malaysia, Melaka Malaysia, 7 Desember, Malaysia, Asia Pacific Industrial Engineering and Management Society, 6, 978-967-5148-80-4.

Zahari Taha, Jamali Md Sah, Rossi Passarella, Raja Ariffin Raja Ghazilla, Norhafizan Ahmad, Yap Hwa Jen, Tuw Tze Khai, Zulkefle Kassim, Iskandar Hasanuddin, Mokhtar Yunus, 2009, A Solar Vehicle Based on Sustainable Design Concept, Proceedings The IASTED International Conference on Solar Energy (SOE 2009), The IASTED International Conference on Solar Energy (SOE 2009), Phuket, Thailand, 16 ? 18 Maret, Calgary, AB, Canada, ACTA Press, 647, 978-0-88986-791-8.

Z. Taha, Sugiyono, N. Ahmad, R.A.R. Ghazilla, H.J. Yap, T.Y.T. Ya, R. Passarella, I. Hasanuddin, and M. Yunus., 2009, The Effect of Spherical Hub-Nose Position on Pressure Drop in an Oscillating Water Column System for Wave Energy Conversion, Proceedings The IASTED International Conference on Solar Energy (SOE 2009), pp 15-19, Phuket, Thailand, The IASTED International Conference on Solar Energy (SOE 2009), Thailand, 16 March 2009, Thailand, ACTA Press, 5, 978-0-88986-791-8.

Zahari Taha, Iskandar Hasanuddin, Raja Ariffin Raja Ghazilla, Novita Sakundarini, 2008, Comparison of Motion Data from Video Camera and Accelerometer of Human Running, Proceedings APIEMS The 9th Asia Pacific Industrial engineering & Management Systems Conference, The 9th Asia Pacific Industrial engineering & Management Systems Conference, Bali Indonesia, Desember 2008, Indonesia, Asia Pacific Industrial engineering & Management Systems Society, 10, 978-979-18925-0-6.

Raja Ariffin Raja Ghazilla, Zahari Taha, Novita Sakundarini, Iskandar, 2008, Eco Design Tools in Product Development Review and direction, Proceedings APIEMS The 9th Asia Pacific Industrial engineering & Management Systems Conference, The 9th Asia Pacific Industrial engineering & Management Systems Conference, Bali Indonesia, Desember 2008, Indonesia, Asia Pacific Industrial engineering & Management Systems Society, 8, 978-979-18925-0-6.

Zahari Taha, Novita Sakundarini, Raja Ariffin Raja Ghazilla, Iskandar Hasanuddin, 2008, The Implementation of Design for Environment In Malaysian and Indonesian Industries A Survey., Proceedings APIEMS The 9th Asia Pacific Industrial engineering & Management Systems Conference, The 9th Asia Pacific Industrial engineering & Management Systems Conference, Bali Indonesia, Desember 2008, Indonesia, Asia Pacific Industrial engineering & Management Systems Society, 9, 978-979-18925-0-6.

Lee Jer Vui, Z. Taha, Yap Hwa jen, Iskandar, Mohamed Razif Mohamed Ali, 2004, Trajectory planning for smooth motion of surgical robot, The 4th Annual Seminar of National Science Fellowship 2004, The 4th Annual Seminar of National Science Fellowship 2004, Pulau Pinang, 19 Desember, Malaysia, Universiti Sain Malaysia, 5, -.

Iskandar, Z. Taha, Nazaruddin, N. Ahmad, R.A. Ghazilla, Sharifah Shameem, 2001, Biomechanical Analysis from Motion Data, Occupational Ergonomics, The 6th Pan-pacific conference on occupational ergonomics, Beijing, China, 21 agustus, China, Tianjin Science and Technology Press, 5, 7-5308-3126-7.

Nazaruddin, Z. Taha, Sharifah Shameem, R.A. Ghazilla, Iskandar, 2001, Anthopometrics Data of Malaysian Industrial Workers, Occupational Ergonomics, The 6th Pan-pacific conference on occupational ergonomics, Beijing, China, 21 agustus, China, Tianjin Science and Technology Press, 4, 7-5308-3126-7.

Sharifah Shameem, Z. Taha, Nazaruddin, R.A. Ghazilla, Iskandar, N.Ahmad, 2001, Environmental and Psychosocial Conditions in Malaysian manufacturing Industries, Occupational Ergonomics, The 6th Pan-pacific conference on occupational ergonomics, Beijing, China, 21 agustus, China, Tianjin Science and Technology Press, 4, 7-5308-3126-7.

R.A. Ghazilla, Z. Taha, Iskandar, Nazaruddin, S.S. Syed Salim Agha, 2001, Development of a Conceptual Tool for Ergonomic Design: Architecture of an Affordable Integrated Man Modeling System, Occupational Ergonomics, The 6th Pan-pacific conference on occupational ergonomics, Beijing, China, 21 agustus, China, Tianjin Science and Technology Press, 4, 7-5308-3126-7.


Buku (Books)

Mohd Hasnun Arif Hassan, Zahari Taha, Iskandar Hasanuddin, Mohd Jamil Mohamed Mokhtarudin, 2018, Concussion in Soccer, Singapore, Springer, 978-981-13-0271-8.

Mohd Hasnun Arif Hassan, Zahari Taha, Iskandar Hasanuddin, Mohd Jamil Mohamed Mokhtarudin, 2018, Soccer Ball Finite Element Model, Singapore, Springer, 978-981-13-0271-8.

Mohd Hasnun Arif Hassan, Zahari Taha, Iskandar Hasanuddin, Mohd Jamil Mohamed Mokhtarudin, 2018, Human Head Finite Element Model, Singapore, Springer, 978-981-13-0271-8.

Mohd Hasnun Arif Hassan, Zahari Taha, Iskandar Hasanuddin, Mohd Jamil Mohamed Mokhtarudin, 2018, Simulation of Soccer Heading Manoeuvre, Singapore, Springer, 978-981-13-0271-8.

Mohd Hasnun Arif Hassan, Zahari Taha, Iskandar Hasanuddin, Mohd Jamil Mohamed Mokhtarudin, 2018, Analysis of Protective Headgear, Singapore, Springer, 978-981-13-0271-8.