Dr. Muhammad Rizal, S.T, M.Sc

Tentang Saya (About Me)

Muhammad Rizal received the B.Eng degree (ST) in mechanical engineering from the University of North Sumatera (USU) Medan, Indonesia in 2002. From 2003 to 2006, he was assistant manager of palm oil mill in Asian Agri Group. Then, he joined the Mechanical Engineering Department of Syiah Kuala University (UNSYIAH) since 2006 as a lecturer. He received his M.Sc and PhD degrees in Mechanical and Materials Engineering from the National University of Malaysia (UKM) in 2011 and 2015. His research interests include machining processes, mechanical sensing systems, online monitoring systems and decision making system.



email muh.rizal[at]unsyiah.ac.id
www https://www.researchgate.net/profile/Muhammad_Rizal5
idThomson idScopus idGoogleScholar

Publikasi (Publications)

Jurnal (Journals)

Ping Chuan Siow, Jaharah A. Ghani, Muhammad Rizal, Talib Ria Jaafar, Mariyam Jameelah Ghazali & Che Hassan Che Haron, 2019, The study on the properties of TiCxN1-x coatings processed by cathodic arc physical vapour deposition, Tribology - Materials, Surfaces & Interfaces, 13(1), 58-66, 1751-5831.

Ping Chuan Siow, Jaharah A. Ghani, Muhammad Rizal, Talib Ria Jaafar, Mariyam Jameelah Ghazali & Che Hassan Che Haron, 2019, Surface characterisation of TiCxN1-x coatings processed by cathodic arc physical vapour deposition: XPS and XRD analysis, Surface and Interface Analysis, 51, 611–617, 1096-9918.

N. A. Kasim, M. Z. Nuawi, J. A. Ghani, M. Rizal, M. A. F. Ahmad and C. H. Che Haron, 2019, Cutting tool wear progression index via signal element variance, Journal of Mechanical Engineering and Sciences, 13(1), 4596-4612, 2231-8380.

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron, 2018, Design and construction of a strain gauge-based dynamometer for a 3-axis cutting force measurement in turning process, Journal of Mechanical Engineering and Sciences, 12(4), 4072-4087, 2231-8380 .

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron, 2018, An embedded multi-sensor system on the rotating dynamometer for real-time condition monitoring in milling, International Journal of Advanced Manufacturing Technology, 95, 811–823, 1433-3015.

Nurul Hidayah Md Tahir, Muhammad Rizal, Wan Nuha Wan Mansor, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron, 2017, The Correlation Between Tool Wear and Vibration Signals from Piezoelectric in End Milling of AISI P20+NI , Journal of Mechanical Engineering, 3(2), 49-62, 1823-5514.

Wan Nuha Wan Mansor, Nurul Hidayah Md Tahir, Jaharah A. Ghani, Che Hassan Che Haron, Mohd Zaki Nuawi, Muhammad Rizal, 2017, Tool Wear Condition Monitoring using Slip Ring and Accelerometer System in Milling AISI P20 Tool Steel, Journal of Mechanical Engineering, 3(2), 63-72, 1823-5514.

Mohd Nor Azam Bin Mohd Dali, Jaharah A. Ghani, Che Hassan Che Haron, Muhammad Rizal, 2017, TRIZ Approach for Designing a New Assisted Tooling for Dimple Structure Fabrication , Journal of Mechanical Engineering, SI(1), 79-90, 1823-5514.

Sharudin Hassan, Jaharah A. Ghani, Che Hassan Che Haron, Mohd Nor Azam Mohd Dali, Muhammad Rizal, 2017, A Review of the Milling Process to Fabricate a Dimple Structure , Journal of Mechanical Engineering, SI(1), 175-192, 1823-5514.

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron, 2017, Cutting tool wear classification and detection using multi-sensor signals and Mahalanobis-Taguchi System, Wear, 376-37, 1759-1765, 0043-1648.

Nurul Hidayah Md Tahir, Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron, 2016, Monitoring the Flank Wear using Piezoelectric of Rotating Tool of Main Cutting Force in End Milling, Jurnal Teknologi (Sciences & Engineering), 78:(6-, 45-51, 2180–3722.

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi and Che Hassan Che Haron, 2015, Development and testing of an integrated rotating dynamometer and tool holder for milling process, Mechanical System and Signal Processing, 52-53, 559-576, 0888-3270.

Ali Nurrakhmad Siregar, Jaharah A. Ghani, Che Hassan Che Haron, Muhammad Rizal, 2015, Parameters affecting the extraction process of Jatropha curcas oil using a single screw extruder, Journal of Engineering and Technological Sciences, 47(3), 266-278, 2337-5779.

Hendri Yanda, Jaharah A. Ghani, Muhammad Rizal, Che Hassan Che Haron, 2015, Performance of uncoated and coated carbide tools in turning FCD700 using fem simulation, International Journal of Simulation Modelling, 14(3), 416-425, 1726-4529.

Mohamad Amir Shafiq Tahir, Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron, 2015, Flank wear and I-kaz 3D correlation in ball end milling process of Inconel 718, Journal of Mechanical Engineering and Sciences, 9, 1595-1603, 2289-4659.

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi and Che Hassan Che Haron, 2014, A Comparative Study of I-kaz Based Signal Analysis Techniques: Application to Detect Tool Wear during Turning Process, Jurnal Teknologi (Sciences & Engineering), 66(3), 99-105, 2180-3722.

Mohamad Amir Shafiq Tahir, Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron, 2014, Prediction of Tool Wear for Ball End Nose in Milling Inconel 718 Using a Feed Forward Back Propagation Neural Network , Australian Journal of Basic and Applied Sciences, 8(5), 383-390, 1991-8178 .

Muhammad Rizal, Jaharah A. Ghani, Che Hassan Che Haron, Mohd Zaki Nuawi, 2014, I-kazTM-Based Analysis of Cutting Force Signals for Tool Condition Monitoring in Turning Process, Applied Mechanics and Materials, 471, 203-207, 1660-9336.

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi and Che Hassan Che Haron, 2014, A Review of Sensor System and Application in Milling Process for Tool Condition Monitoring, Research Journal of Applied Sciences, Engineering and Technology, 7(10), 2083-2097, 2040-7459.

Ali Nurrakhmad Siregar, Wan Mohd Faizal Wan Mahmod, Jaharah A. Ghani, Che Hassan Che Haron and Muhammad Rizal, 2014, Design and Analysis of Single Screw Extruder for Jatropha Seeds Using Finite Element Method, Research Journal of Applied Sciences, Engineering and Technology, 7(10), 2098-2105, 2040-7459.

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi and Che Hassan Che Haron, 2014, A Wireless System and Embedded Sensors on Spindle Rotating Tool for Condition Monitoring, Advanced Science Letters, 20, 1829-1832, 1936-6612.

Jaharah A. Ghani, Muhammad Rizal, and Che Hassan Che Haron, 2014, Performance of green machining: a comparative study of turning ductile cast iron FCD700, Journal of Cleaner Production, 85, 289-292, 0959-6526.

Muhammad Rizal, Jaharah A. Ghani, Che Hassan Che Haron, Mohd Zaki Nuawi, 2013, The Application of I-kazTM-Based Method for Tool Wear Monitoring using Cutting Force Signal , Procedia Engineering, 68, 461 – 468 , 1877-7058.

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi and Che Hassan Che Haron, 2013, Online tool wear prediction system in the turning process using an adaptive neuro-fuzzy inference system, Applied Soft Computing, 13, 1960–1968, 1568-4946.

Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron, 2012, Development of an Adequate Online Tool Wear Monitoring System in Turning Process Using Low Cost Sensor, Advanced Science Letters, 13, 702-706, 1936-6612.

Jaharah A. Ghania, Poh Siang Jye, Che Hassan Che Haron, Muhammad Rizal, Mohd Zaki Nuawi, 2012, Relationship Between Measurement of Cutting Force and Sensor Location in Turning Process, Jurnal Teknologi (Sciences & Engineering), 59, 91-94, 0127–9696.

Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Mariyam Jameela Ghazali, and Che Hassan Che Haron, 2011, Monitoring online cutting tool wear using low-cost technique and user-friendly GUI, Wear, 271, , 0043-1648.

Jaharah A. Ghani, Muhammad Rizal, Ahmad Sayuti, Mohd Zaki Nuawi, Rizauddin Ramli, Baba Deros and Che Hassan Che Haron, 2011, Online tool wear monitoring using portable digital assistant (PDA), International Journal of the Physical Sciences, 6(16), 4064-4069, 1992-1950.

Jaharah A. Ghani, Poh Siang Jye, Che Hassan Che Haron, Muhammad Rizal, and Mohd Zaki Nuawi, 2011, Determination of sensor location for cutting tool deflection using finite element method simulation, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 226(9), 2373-2377, 0954-4062.

Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron, Mariyam Jameela Ghazali, and Mohd Nizam Ab Rahman, 2010, Online Cutting Tool Wear Monitoring using I-kaz Method and New Regression Model, Advanced Materials Research, 126-12, 738-743, 1662-8985.

Prosiding (Proceedings)

Muhammad Rizal, Amir Zaki Mubarak, Asbar Razali, and Muhammad Asyraf, 2019, Free Vibration Characteristics of Jute Fibre Reinforced Composite for the Determination of Material Properties: Numerical and Experimental Studies , The 4th International Conference on Mechanical Engineering (ICOME2019), ICOME 2019, Yogyakarta, 28–29 August 2019, United State, AIP Conference Proceedings, , 1551-7616.

Nur Adilla Kasim, Mohd. Zaki Nuawi, Jaharah A Ghani, Che Hassan Che Haron, Muhammad Rizal, Mohd Ghafran Mohamed, 2018, Cutting tool wear prediction using novel pie-zofilm-based vibratory signal analysis (Z-rot), 25th International Congress on Sound and Vibration 2018, ICSV 2018, 25th International Congress on Sound and Vibration 2018, ICSV 2018, Hiroshima, 8-12 Juli 2018, -, -, 0, -.

Husni, Muhammad Rizal, M. Aziz M and M. Wahyu, 2018, Ceramic tools insert assesment based on vickers indentation methodology, IOP Conference Series: Materials Science and Engineering, THE 8th AIC 2018 ON SCIENCES & ENGINEERING, Banda Aceh, 12-14 September 2018, IOP, IOP, , -.

M. Rizal, Husaini, M. Abrar and M. Y. Wiranda, 2018, An analytical, numerical and experimental study of an octagonal ring force transducer for a 2-axis force measurement , International Seminar on Metallurgy and Materials, International Seminar on Metallurgy and Materials, Tanggerang, , United Kingdom, IOP Conference Series: Materials Science and Engineering, , 17578981.

Nur Adilla Kasim, Mohd Zaki Nuawi, Jaharah A. Ghani, Che Hassan Che Haron, Muhammad Rizal and Mohd Ghafran Mohamed, 2018, Cutting Tool Wear Prediction using Novel Piezofilm-based Vibratory Signal Analysis (Z-Rot), 25th International Congress on Sound and Vibration, International Congress on Sound and Vibration, Hiroshima, 8-12 July 2018, Japan, International Institute of Acoustics and Vibration , , 978-1-5108-6845-8.

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi and Che Hassan Che Haron, 2015, A triaxial cutting force measurement utilizing an embedded transducer on a spindle rotating tool, Proceedings of Ninth International Conference on Sensing Technology, Ninth International Conference on Sensing Technology (ICST 2015), Auckland, New Zealand, 8-10 Desember 2015, Massey University, IEEE, , 978-1-4799-6314-0.

Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron, 2010, Statistical Analysis for Detection Cutting Tool Wear Based on Regression Model, Proceedings of the International MultiConference of Engineers and Computer Scientists, International MultiConference of Engineers and Computer Scientists (IMECS 2010), Hong Kong, 17-19 March, 2010, Hong Kong, IAENG Online Journals, , 2078-0958.

Muhammad Rizal, Jaharah A. Ghani, Che Hassan Che Haron, Mohd Zaki Nuawi, 2009, I-Kaz Method for Tool Wear Monitoring using Dynamic Forces Signal, Proceedings of Regional Engineering Postgraduate Conference (EPC) 2009, Regional Engineering Postgraduate Conference (EPC) 2009, Putrajaya, Malaysia, 20-21 Oktober 2009, Putrajaya, UKM, 0, .

Muhammad Rizal, Jaharah A. Ghani, Mohd Zaki Nuawi, Che Hassan Che Haron, 2009, Software for Online Tool Wear Monitoring, Proceedings of International Conference for Technical Postgraduate (TECHPOS 2009), International Conference for Technical Postgraduate (TECHPOS 2009), Kuala Lumpur, 7-8 Desember 2009, Kuala Lumpur, TECHPOS 2009, 0, .

Jaharah A. Ghani, Muhammad Rizal, Mohd Zaki Nuawi, Che Hassan Che Haron and Ahmad Sayuti, 2009, New Regression Model and I-Kaz Method for Online Cutting Tool Wear Monitoring, Proceedings of World Academy of Science, Engineering and Technology, World Academy of Science, Engineering and Technology (WASET 2009), Bangkok, Thailand, 25-27 December 2009, Thailand, WASET, 0, 2010-3778.

Muhammad Dirhamsyah, Muhammad Rizal, 2008, Static Load Analysis on Cylindrical Turning Process, Proceedings of The International Conference on Mathematics, Statistics and Applications (ICMSA), The 4th IMT-GT International Conference on Mathematics, Statistics and Applications (ICMSA), Banda Aceh, 9 -11 Juni 2008, Banda Aceh, ICMSA 2008, 0, 987-602-8199-10-0.


Buku (Books)

Muhammad Rizal, 2020, Pengukuran Teknik: Dasar dan Aplikasi, Banda Aceh, Syiah Kuala University Press, 9786232641198.

Paten (Patents)

2014, Integrated of rotating dynamometer for milling and drilling process, PI2014701972, Malaysia, Malaysia.
     Muhammad Rizal.