Prof. Dr. Ir. Samsul Rizal, M.Eng.

Tentang Saya (About Me)

I has been serving as the Rector of Syiah Kuala University, Banda Aceh, Indonesia, since 2012. I completed my B.E. degree from the same university in 1987, and finished Master of Engineering (M.Eng) and Ph.D. degrees from Toyohashi University of Technology, Japan, in 1998 and 2001 respectively, both in Mechanical Engineering. I joined Syiah Kuala University as a lecturer at the Department of Mechanical Engineering in 1988. I was appointed as a Vice Rector for Academic Affairs from 2006-2012. In 2001, Toyahashi City has appointed me as a Toyohashi Goodwill Ambassador. My research interests include fracture mechanics, computational mechanics, and damage mechanism of composite structure.

email samsul.rizal@unsyiah.ac.id

Publikasi (Publications)

Jurnal (Journals)

Husaini, Zuhaimi, Rizal, S., Syam, B., 2005, Studi tentang perilaku retak aluminium A 6061-T6 pada pembeban mode campuran, -, Vol. 9, pp. 133-142, -.

Nurdin, H., Syam, B., Basuki WS., Rizal, S., Ibrahim AB., 2005, Simulasi respon headform komposit polimer akibat beban impak kecepatan tinggi, -, Vol. 9, pp.106-114, -.

Rizal, S., Ali, N., Syam, B., Haftirman, 2005, Pengaruh laju regangan pada paduan aluminium 7075-T6 dan 6061-T6 terhadap kekuatan tarik, Jurnal Ilmiah SAINTEK, Vol. 2, -, -.

Rizal, S., Hamdani, Razali, T, 2004, The micro-crack model on deductile failure under impulsive stress intensity loading, Journal Ilmiah SAINTEK, Teknik & Rekayasa, Vol. 2, pp. 145-150, -.

Abdullah, H., Husin, S., Rizal, S., 2004, Pengaruh Laju Regangan Beton Kekuatan Tinggi terhadap kuat Tekan dan Tarik. Buletin Utama Teknik, -, Vol. 8, pp. 124-132, -.

Rizal, S dkk, 2003, The influence of hydrostasic stress on void initation and growth to evaluate toughness, Buletin Utama Teknik, UISU, Vol. 7, pp. 204-208, -.

Syam, B., Rizal, S., Basuki W.S., Ahmad Nayan, Batu Mahadi, 2003, Respon helmet industri yang dikenai beban impak kecepatan tinggi, Buletin Utama Teknik, UISU, Vol. 7, pp. 196-203, -.

Rizal, S., Homma, H, 2002, Experimental Approach to dimple fracture mechanisms under short pulse duration, Engineering Fracture Mechanics, Vol. 6, pp. 1377-1390, -.

Rizal, S, 2001, Effects of Stress-State on Void Coalescence under Dynamics Loading, Jurnal Teknik Mesin, ITB, Vol. X, pp. 88-95, 2001, -.

Rizal, S, 2001, Disclocation emission model for dimple fracture, Fusii, No. 8, pp. 53-56, -.

Rizal, S. and Homma, H, 2000, Effect of loading rate and stress-state on dimple fracture, Mat Science Research Int, Vol. 6, pp. 123-130, -.

Rizal, S, 2000, Void initiation and growth on ductile material, Fusii, No. 6, -, -.

Rizal, S, and Homma, H, 2000, Dimple fracture under short pulse loading, Int. Journal of impact Engineering, vol. 2, pp. 69-83, -.

Rizal, S., 1999, Perpatahan dimple campuran aluminium pada pembebanan tegangan singkat, J. Teknik Mesin, Vol. 3, pp. 10-16, -.

Khairul, F., Rakmad, AS., Rizal, S., 1999, Numerical Analysis of dynamic stress in a spur gears tooth, J. Teknik Mesin, Vol. 3, pp. 35-44, -.

Khairul, F., Rakmad, AS., Rizal, S., 1998, Numerical analysis of bending stress in a spur gears tooth subjected to static loading, J. Teknik Mesin, Vol. 2, pp. 75-79, -.

Rizal, S., 1998, Use of fracthograph and sectionong techniques to study mechanism in dimple fracture, J. Teknik Mesin, Vol. 2, pp. 65-68, -.

Rizal, S., 1998, Fracture toughness measurements of aluminum alloys under short pulse loading, J. Teknik Mesin, Vol. 2, pp. 59-64, -.

Prosiding (Proceedings)

Maruhum TL., Haftirman, Rizal, S., Fadillah, R., 2005, Stress corrosion cracking pada baja nirkarat austenit di lingkungan larutan glyserol & klorida temperature tinggi, Proceding the 3th Regional Seminar on Materials, Energy & Structure 2005, -, -, -, -, pp XIII-1 s/d XIII-6, -.

Nurdin, H., Syam, B., Basuki, WS., Rizal, S., 2005, Simulasi respon headform komposit akibat beban impak, Proceeding the 3th Regional Seminar on Materials, Energy & Structure 2005, -, -, -, -, pp. IX-8, -.

Mawardi, I., Syam, B., Rizal, S., Nurdin, H., 2005, Modeling Headform dari Material GFRP dan responnya terhadap beban impak kecepatan tinggi, Proceding the 3th Regional Seminar on Materials, Energy & Structure 2005, -, -, -, -, pp VIII-1 s/d VIII-10, -.

Mahadi, B., Syam, B., Basuki WS., Thayab, A., Rizal, S., 2005, Aplikasi Teknik dua gage dan pengukuran langsung respon helm industri yang dikenai beban impak kecepatan tinggi, Proceeding the 3th Regional Seminar on Materials, Energy & Structure 2005, -, -, -, -, pp VI-1 s/d VI-9, -.

Jonhson BB, Haftiman, Rizal, S., Fadhila, R.,, 2005, Karakteristik kegagalan stress corrosion cracking pada material baja nirkarat autenit di lingkungan larutan fatty acid & klorida, Proceding the 3th Regional Seminar on Materials, Energy and Structure 2005, -, -, -, -, pp V-1 s/d V-9, -.

11. Rizal, S., Kurniawan, R., Thaib, R., Firdaus, 2003, A Numerial simulation on tensile split Hopkinson bar test speciments, Proceeding CMNA 2003, CMNA 2003, Banda Aceh, -, Banda Aceh, -, pp. 131-135, -.

Rizal, S., Firdaus, T., Homma, H, 2002, A Study on Dimple Fracture Mechanisms under Dynamic Loading, proc. ISEM2002, ISEM2002, Taipei-Taiwan, Republic of China, 28-30 December 2002, Taipei-Taiwan, Republic of China, -, -, -.

Rizal, S., Homma, H, 2002, Material behavior under tensile Dynamic Loading, Proc. Materials and Structure 2002, -, Medan-Indonesia, 26 December 2002, Medan-Indonesia, -, -, -.

Rizal, S, 2002, Tensile Testing of Materials at High Rates of Strain, Proc. SST2002, SST2002, Jakarta-Indonesia, July7-8, 2002, Jakarta-Indonesia, -, -, -.

Rizal, S., Makmur, H., Udink, A., Rudi, K, 2002, Pendekatan numerik pada Pertumbuhan Rongga dan Pengaruh terhadap Ketangguhan Retak Dinamik, Proc. SNTTM2002, -, Surabaya, Indonesia, 15-16 Oktober 2002, Surabaya, Indonesia, -, -, -.

Razali, T., Rizal, S, 2002, Pengaruh penggunaan serat kayu pinus sebagai penguat terhadap sifat mekanik pada komposit matrik polyster, Proc. SNTTM2002, -, Surabaya, Indonesia, 15-16 Oktober 2002, Surabaya, Indonesia, -, -, -.

Firdaus, T., Rizal, S, 2002, Pengaruh terbentuknya struktur mikro dual fasa terhadap sifat mekanis baja SS400, Proc. SNTTM2002, -, Surabaya, Indonesia, 15-16 Oktober 2002, Surabaya, Indonesia, -, -, -.

Razali, A., Kurniawan, R., Rizal, S, 2002, Validitas pengukuran 1-demensi pada tensile split Hopkinson bar dengan metoda elemen hingga, Proceeding CMNA 2002, CMNA 2002, Banda Aceh, -, Banda Aceh, -, pp. 25-28, -.

Rizal, S., 2002, Study on Dimple Fracture Mechanisms Under Dynamic Loading, Proc. SST2002, SST2002, Jakarta-Indonesia, -, Jakarta-Indonesia, -, -, -.

Rizal, S., 2002, A Study on Dimple Fracture Mechanisms Under Dynamic Loading, Proc. SST2002, SST 2002, Jakarta, Indonesia, -, Jakarta, Indonesia, -, -, -.

Penghargaan (Awards)

01-01-2001, Goodwill Ambasador, Toyahashi City, Toyohashi, Japan.