Dr.-Ing. Teuku Edisah Putra, S.T, M.Sc., Ph.D

Tentang Saya (About Me)

Teuku Edisah Putra was born on May 7th, 1980. He is a lecturer at Department of Mechanical Engineering, Faculty of Engineering, Universitas Syiah Kuala, Banda Aceh, Indonesia since 2006. His research interest includes fatigue life assessments, structural integrity and mechanical signal processing. He holds a bachelor degree in Mechanical Engineering from Universitas Syiah Kuala in 2005. He obtained his master degree from Department of Mechanical and Materials Engineering, Universiti Kebangsaan Malaysia, in 2010, with research theme on fatigue data editing using the wavelet transform. He obtained Dr.-Ing. and Ph.D. from Department of Mechatronis, Universität Duisburg-Essen, Germany, and Department of Mechanical and Materials Engineering, Universiti Kebangsaan Malaysia, respectively, through a double degree program in 2016. His Ph.D. research focused on the development of fatigue-based strain signals using multi-body dynamic simulation. He is actively involved as author and co-author at national and international journals.

email edi[at]unsyiah.ac.id
www www.fsd.unsyiah.ac.id/teukuedisahputra
idGaruda idThomson idScopus idGoogleScholar

Publikasi (Publications)

Jurnal (Journals)

T.E. Putra, Husaini, H. Prakasa, I. Hasanuddin, M. Rizal, M.N. Machmud, 2020, Fatigue Life Assessments of the SAE 5160 Carbon Steel Subjected to Uphill and Downhill Roads Strains, Defect and Diffusion Forum, 402, 33-38, 1662-9507.

T E Putra, Husaini, Hary Prakasa, 2020, Prediction of the Fatigue Life of the SAE 5160 Carbon Steel Coil Spring Based on Strain-Life Approach, Key Engineering Materials, 841, 381-386, 1662-9795.

T.E. Putra, Husaini, M. Ikbal, I. Hasanuddin, M. Rizal, M.N. Machmud, 2020, Fatigue Life Assessments of the AISI 1513 Carbon Steel Subjected to Road Surface Strains, Defect and Diffusion Forum, 402, 39-44, 1662-9507.

T.E. Putra, S. Abdullah, D. Schramm, 2020, Locating Damaging Segments in the Acceleration Signal of an Automotive Coil Spring using the Wavelet Transform, International Journal of Advanced Science and Technology, 29, 2666-2672, 2005-4238.

D. Asrina, T.E. Putra, Husaini, 2020, Development of a Noise Filtering Algorithm for Strain Signals Using the Fast Fourier Transform, The International Journal of Integrated Engineering, 12, 191-196, 2229-838X.

T.E. Putra, Husaini, M.N. Machmud, 2020, Predicting the fatigue life of an automotive coil spring considering road surface roughness, Engineering Failure Analysis, 116, 1-10, 1350-6307.

T.E. Putra, S. Abdullah, D. Schramm, 2020, Effect of cycle amplitude removal of fatigue strain loadings associated to signal energy characteristics, Engineering Failure Analysis, 116, 1-13, 1350-6307.

Husaini, T.E. Putra, N. Ali, 2018, Fatigue feature clustering of modified automotive strain signals for saving testing time, International Journal of Automotive and Mechanical Engineering (IJAME), , , .

Husaini, T.E. Putra, Zulfikar, 2018, Analysis of cracks on a fractured surface of the vehicle crankshaft using the finite element method, International Journal of Engineering & Technology (IJET), 7, 1564-1568, 2227-524X.

T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2017, Reducing cyclic testing time for components of automotive suspension system utilising the wavelet transform and the Fuzzy C-Means, Mechanical Systems and Signal Processing, 90, 1-14, 0888-3270.

T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2017, The need to generate realistic strain signals at an automotive coil spring for durability simulation leading to fatigue life assessment, Mechanical Systems and Signal Processing, 94, 432-447, 0888-3270.

T. E. Putra, S. Abdullah, D. Schramm, M. Z. Nuawi, T. Bruckmann, 2015, Generating strain signals under consideration of road surface profiles, Mechanical Systems and Signal Processing, 60-61, 485-497, 0888-3270.

T.E. Putra, S. Abdullah, M.Z. Nuawi, M.F.M. Yunoh, 2014, The Morlet and Daubechies wavelet transforms for fatigue strain signal analysis, Applied Mechanics and Materials, 471, 197-202, 1662-7482.

T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2014, Wavelet-based feature extraction algorithm for fatigue strain data associated with the k-means clustering technique, Advanced Materials Research, 891-89, 1717-1722, 1662-8985.

T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2014, FCM-based optimisation to enhance the Morlet wavelet ability for compressing suspension strain data, Procedia Materials Science, 3, 288-294, 2211-8128.

T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, M.F.M. Yunoh, 2014, Time-frequency-based fatigue data editing for automotive applications, Australian Journal of Basic and Applied Sciences, 8, 88-91, 1991-8178.

S. Abdullah, T.E. Putra, D. Schramm, M.Z. Nuawi, 2014, Acceleration data extraction associating to the peak-valley segmentation approach using the Morlet wavelet transform, Chaotic Modeling and Simulation (CMSIM), 1, 69-77, 2241-0503.

T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2014, Application of the wavelet transforms for compressing lower suspension arm strain data, Applied Mechanics and Materials, 663, 78-82, 1662-7482.

S. Abdullah, T.E. Putra, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2014, Generation of simulated acceleration and strain signals as the responses of a car coil spring, International Journal of Fracture Fatigue and Wear, 2, 189-194, 2294-7868.

T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, L. Abdullah, A. Arifin, 2011, Extracted fatigue damaging events using the Morlet wavelet-based algorithm, The Hong Kong Institution of Engineers Transactions, 18, 22-29, 1023-697X.

Z.M. Nopiah, S. Abdullah , M.N. Baharin, T.E. Putra, S.N. Sahadan, K.O. Willis, 2011, Comparative study on data editing techniques for fatigue time series signals, Advanced Materials Research, 146-14, 1681-1684, 1662-8985.

T.E. Putra, S. Abdullah, M.Z. Nuawi, 2011, Data scattering of fatigue damaging segmentation in order to develop the fatigue damaging and Morlet wavelet coefficient relationship, International Review of Mechanical Engineering, 5, 605-610, 1970-8742.

S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, 2011, The use of Morlet wavelet coefficients for identifying fatigue damage features, Pertanika Journal of Science and Technology, 19, 107-114, 0128-7680.

S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, 2011, Vibrational fatigue analysis of a strain loading using the frequency and wavelet filtering methods, Key Engineering Materials, 462-46, 124-129, 1662-9795.

S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin, L. Abdullah, 2010, Extracting fatigue damage features using STFT and CWT, WSEAS Transactions on Signal Processing, 3, 91-100, 1790-5052.

S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin, L. Abdullah, 2010, The Morlet wavelet analysis for fatigue feature clustering, WSEAS Transactions on Mathematics, 5, 345-354, 1109-2769.

T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2010, Wavelet coefficient extraction algorithm for extracting fatigue features in variable amplitude fatigue loading, Journal of Applied Sciences, 10, 277-283, 1812-5654.

T.E. Putra, 2009, Live load analysis on main tribune frames of the Harapan Bangsa stadium, Jurnal Pengembangan dan Penerapan Teknologi (P&PT), 7, 577-581, 0854-5766.

Prosiding (Proceedings)

T E Putra, Husaini, M. Ikbal, 2020, Effect of Road Surface Contour to the Fatigue Life of a Coil Spring Based on Strain-Life Approach, IOP Conference Series: Materials Science and Engineering, The 2019 6th International Conference on Advanced Materials, Mechanics and Structural Engineering, Seoul, Korea Selatan, 18-20 Oktober 2019, , IOP Science, 0, 1757-8981.

T.E. Putra, Husaini, N. Ali, I. Hasanuddin, Hendrayana, A. Bakhtiar, 2019, Numerical analysis of the stress leading to fatigue failure on a coil spring of the front suspension of a car, , The 8th AIC-ICMR on Science and Engineering 2018, Banda Aceh, 12-14 September 2018, , IOP Conf. Series: Materials Sciences and Engineering, , 1757-8981.

T.E. Putra, Husaini, N. Ali, H. Husin, Zulfikar, 2019, Failure analysis of the fracture surface of the crankshaft of a vehicle, , The 8th AIC-ICMR on Science and Engineering 2018, Banda Aceh, 12-14 September 2018, , IOP Conf. Series: Materials Sciences and Engineering, 0, 1757-8981.

T.E. Putra, Husaini, N. Ali, M.N. Machmud, A. Bakhtiar, Hendrayana, 2019, Analysis of surface failure of coil spring in passenger vehicle suspension system, , The 8th AIC-ICMR on Science and Engineering 2018, Banda Aceh, 12-14 September 2018, , IOP Conf. Series: Materials Sciences and Engineering, 0, 1757-8981.

Husaini, E. Saputra, Husni, T.E. Putra, M. Rachman, 2019, Failure analysis of a centrifugal pump shaft experiencing plastic deformation , , The 8th AIC-ICMR on Science and Engineering 2018, Banda Aceh, 12-14 September 2018, , IOP Conf. Series: Materials Sciences and Engineering, , 1757-8981.

N. Ali, T.E. Putra, Husaini, V.Z. Iskandar, S.Thalib, 2019, Corrosion rate of low carbon steel for construction materials in various NaCl concentrations, , International Conference on Science and Innovated Engineering (I-COSINE), Sabang, 21-22 Oktober 2018, , IOP Conf. Series: Materials Sciences and Engineering, 0, .

Husaini, N. Ali, R. Riantoni, T.E. Putra, H. Husin, 2019, Study of leaf spring fracture behavior used in the suspension systems in the diesel truck vehicles, , International Seminar on Metallurgy and Materials (ISMM 2018), Tanggerang, 25-26 September 2018, , IOP Conf. Series: Materials Sciences and Engineering, 0, .

Husaini, Rizki Riantoni, Nurdin Ali, Teuku Edisah Putra, 2019, Failure analysis of the leaf spring of truck Cold diesel using finite element , , International Conference on Design and Application of Engineering Materials (IC-DAEM), Bandung, 6-7 September 2019, , IOP Conf. Series: Materials Sciences and Engineering, 0, .

M. Ali, Husaini, T.E. Putra, N. Ali, 2019, The needs to investigate the effect of road surface vibrations to the fatigue life of a coil spring, , Conference on Innovation in Technology and Engineering Science, Padang, 8-9 November 2018, , IOP Conf. Series: Materials Sciences and Engineering, 0, .

T E Putra, Husaini, M. Ramdani Dongoran, 2019, Effect of vehicle speed to the fatigue life of a coil spring based on strain-life approach, AIP Conference Proceedings, 4th International Conference on Mechanical Engineering, Yogyakarta, Indonesia, 28-29 Agustus 2019, , AIP Publishing, 0, 00001984, 00002005, 00001983.

T.E. Putra, S. Abdullah, D. Schramm, M.Z. Nuawi, T. Bruckmann, 2013, The Morlet wavelet-based features extraction for compressing automotive fatigue strain data, , 7th International Conference on Low Cycle Fatigue (LCF7), Aachen, Germany, 9-11 September 2013, Aachen, Germany, , 0, 978-3-9814516-3-4.

T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2010, Effectiveness of the Morlet wavelet in generating new shortened fatigue strain signal, , The 1st Regional Conference on Applied and Engineering Mathematics (RCAEM), Penang, Malaysia, 2-3 Juni 2010, Penang, Malaysia, , 0, 137-142.

S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin, L. Abdullah, 2010, Using Morlet wavelet coefficients to cluster variable amplitude fatigue features, , The 5th IASME / WSEAS International Conference on Continuum Mechanics, Cambridge, UK, 23-25 February 2010, Cambridge, UK, , 0, 978-960-474-158-8.

S. Abdullah, T.E. Putra, M.Z. Nuawi, Z.M. Nopiah, A. Arifin, L. Abdullah, 2010, Time-frequency localisation analysis for extracting fatigue damaging events, , The 9th WSEAS International Conference on Signal Processing, Robotics and Automation (ISPRA), Cambridge, UK, 20-22 February 2010, Cambridge, UK, , 0, 978-960-474-157-1.

T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2009, A pilot study of the fatigue strain signal behaviour at lower suspension arm based on road loadings, , Engineering Postgraduate Conference (EPC), Kuala Lumpur, Malaysia, 20-21 October 2009, Kuala Lumpur, Malaysia, , 0, 978-983-2982-28-9.

T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2009, Correlation between the fatigue damage and the Morlet wavelet, , Engineering Mathematics Seminar (EMaS), Port Dickson, Malaysia, 23-25 November 2009, Port Dickson, Malaysia, , 0, 978-983-2982-29-6.

T.E. Putra, S. Abdullah, M.Z. Nuawi, 2009, Ability of the Morlet wavelet in shortening a fatigue strain signal, , National Conference on Postgraduate Research (NCON-PGR), Pahang, Malaysia, 1 October 2009, Pahang, Malaysia, , 0, 978-967-5080814.

T.E. Putra, S. Abdullah, M.Z. Nuawi, 2009, An extraction computational algorithm based on the Morlet wavelet coefficient spectrum, , 2009 IEEE International Conference on Signal and Image Processing Applications (ICSIPA), Kuala Lumpur, Malaysia, 18-19 November 2009, Kuala Lumpur, Malaysia, , 0, 978-1-4244-5562-1.

T.E. Putra, S. Abdullah, M.Z. Nuawi, Z.M. Nopiah, 2009, Identifying fatigue damaging potential locations using coefficients of the Morlet wavelet transform, , International Advanced of Technology Congress (ATCi), Kuala Lumpur, Malaysia, 3-5 November 2009, Kuala Lumpur, Malaysia, , 0, 978-983-42758-4-6.

S. Abdullah, T.E. Putra, M.Z. Nuawi, 2009, Analysing the wavelet transforms of fatigue strain signals: application in the Morlet and Daubechies wavelet families, , The International Conference on Advances in Materials and Processing Technologies (AMPT), Kuala Lumpur, Malaysia, 26-29 October 2009, Kuala Lumpur, Malaysia, , 0, .

T.E. Putra, S. Abdullah, M.Z. Nuawi, 2009, Fatigue feature clustering algorithm using the Morlet wavelet, , the 2nd WSEAS International Conference on Sensors and Signals (SENSIG '09), the 2nd WSEAS International Conference on Visualization, Imaging and Simulation (VIS '09) and the 2nd WSEAS International Conference on Materials Science (MATERIALS '09), Baltimore, USA, 7-9 November 2009, Baltimore, USA, , 0, 978-960-474-135-9.

T.E. Putra, 2008, Analysis of joint reactions: using aided moment method (AMM), , The 4th IMT-GT Conference on Mathematics, Statistics and Applications (ICMSA), Banda Aceh, Indonesia, 9-11 June 2008, Banda Aceh, Indonesia, , 0, 978-602-8199-11-7.

M. Rizal, T.E. Putra, 2007, Simulasi komputer untuk memprediksi besarnya daya pemotongan pada proses pembubutan silindris, , Seminar Nasional Tahunan Teknik Mesin (SNTTM) VI, Banda Aceh, Indonesia, 20-22 November 2007, Banda Aceh, Indonesia, , 0, 545-551.

F.N. Balia, T.E. Putra, 2006, Strength analysis due to static load on main tribune truss of Harapan Bangsa stadium, , Conference on Computational Mechanics & Numerical Analysis (CMNA), Banda Aceh, Indonesia, 12-14 Mei 2006, Banda Aceh, Indonesia, , 0, 1411-4984.


Buku (Books)

Teuku Edisah Putra, 2017, Artificial mechanical fatigue signal, Mauritius, LAP LAMBERT Academic Publishing, 978-620-2-01040-5.

S. Abdullah, T.E. Putra, M.Z. Nuawi, 2012, Fourier transform - Materials Analysis, Rijeka, Croatia, Intech, 978-953-51-0594-7.